Wax heater Triple 3-in-1

12038
€57.00 inc.VAT
€47.11 without VAT

Wax heater - granules/wax in a can for heating 800ml and two heaters for heating wax cartridges 100ml. Can heat the wax evenly and keep the depilatory wax at the heating temperature.

Independent control switches - you can heat all wax heaters at the same time or use each individually.

Power: 180W

Included:

- base with 800ml heater x1

- wax granule heating container 800ml x1

- cartridge heater x2

In Stock

Product description

Instructions for use

To heat the wax granules:
1. Remove the plastic cover from the wax warmer.
2. Place the wax in a metal container and then place it in the wax warmer.
3. Turn the temperature control knob to "HI" until the wax reaches a liquid consistency. This process takes approximately 25 minutes. To heat the wax faster, place the lid on the heater.
4. When the wax has reached a liquid consistency, place the control knob in the middle position. The temperature will remain constant. It is important to test the temperature of the wax by applying a small amount to the inside of your wrist.
5. When the wax is finished, remove the container from the wax warmer.
6. Turn the heater off by turning the control knob fully counterclockwise. Place the lid on the heater to keep dust out.
7. To clean the heater, use wax cleaner when the device is switched off and the heater is still slightly warm.

To heat a 100ml wax cartridge:
1. Make sure your skin is completely clean before use.
2. Place the wax in the cartridge heater.
3. Connect the heater to the base and plug in the power cord.
4. Heat the wax for about 20-30 minutes.
5. Apply the wax in the direction of hair growth. Make sure the wax temperature is appropriate. If the wax is too hot, wait a while before starting.
6. Apply the depilatory paper to the treatment area and press it gently against the skin.
7. With a quick movement, tear off the paper against the direction of hair growth.
8. After hair removal, apply a post-depilatory product to the skin.

WARNING: Important safety instructions.
When using any electrical appliance, especially when children are present, basic safety precautions should always be followed
to reduce the risk of burns, electric shock, fire, or injury.
1. Never operate the appliance if:
a) it has a damaged cord or plug.
b) it is not working properly.
c) it has been dropped or damaged in any way.
d) it has fallen into water.
2. Keep the cord away from hot surfaces.
3. Do not immerse the heater in water or other liquids.
4. Do not hang the cord over a counter or table where children can pull on it or trip over it.
5. Always use the wax warmer on a level surface.
6. Unplug the appliance when not in use. Allow the heater to cool before using, cleaning, or storing it.
7. Do not wrap the cord around the wax warmer during use.
8. Check the temperature of the wax before placing your hand in the device.
9. Use the wax warmer only for its intended purpose.
10. Turn off the power before cleaning.
11. Do not use on sensitive or problematic skin.
12. Do not expose the skin to sunlight and UV radiation for 24 hours after waxing.
13. Use a soft towel soaked in wax remover to remove any remaining wax.

We found other products you might like!
SALE
€43.00 €39.00
€32.90