Mehendi stencil MX10

The mehendi stencil is a reusable silicone stencil for applying a finished henna pattern.

Using a stencil:

1. Before starting, you need to degrease the area of ​​the skin where the drawing will be applied (or wash it with soap and wipe dry).

2. Remove the backing paper from the stencil and adhere the stencil firmly to the skin.

3. Apply the prepared henna paste, carefully filling all the patterns. The henna layer should be dense and not thin.

4. Leave to dry for at least an hour. The longer you hold the henna on the skin, the brighter the pattern will turn out, the longer it will last.

5. After drying, carefully remove the stencil and henna remnants and wipe the area of ​​the drawing with oil (the oil will fix the drawing).

6. Wash the stencil. If the henna is dry and easy to remove, then you can simply remove the dry henna from the stencil. Glue the stencil to the backing.

The color of the print will darken about 24 hours after application.

It is recommended to pre-test the sensitivity of the skin to henna.